E Series Shed with Grey Cover

E Series Shed with Grey Cover


70401 Size: 6′ x 6′ x 6′ Features: -E-series Shed with Grey Cover.-Heavy duty all steel frame.-UV-treated inside and out with added fade blockers, anti-aging and anti-fungal agents resulting in a cover that withstands the elements.-Rugged Ratchet Tite Tensioning System provides simple installation while keeping cover tight to frame.-Part Number for 6′ x 6′ x 6′: 70401.-Part Number for 10′ x 10′ x 8′: 70333.-Weight for 6′ x 6′ x 6′: 51 lbs.-Weight for 10′ x 10′ x 8′: 88 lbs. Includes: -Includes:

3 thoughts on “E Series Shed with Grey Cover

  1. 30 of 30 people found the following review helpful
    4.0 out of 5 stars
    10′ x 10′ E Series Shed Works Well, March 19, 2010
    By 
    John F. Brown
    (REAL NAME)
      

    I had to make some modifications to the installation process as I built a wood floor to which I attached the shed. Overall, I think it’s a good product and is sturdy once it’s completely finished, the cover is attached and properly adjusted, and tie-down systems are secured. The zipper door works well and I’m happy with the space the shed provides. I would criticize the installation instructions for being a little confusing, so putting the shed together took longer than I expected. You also have to put the framework together and then disassemble it later in order to finish attaching the cover. Don’t build it on a windy day. I thought that the way the end-walls were cut and rigged seemed a little out of whack which makes attaching them hard to understand and maybe the rigging will put additional stress on the fabric and tear it out. It is necessary to do some adjusting on the cover to get it to fit right. Also, There are quite a few hardware parts to assemble. I would like few parts and more simplicity. I mounted the structure ON TOP of a wood floor. If I was doing it over, I’d make the wood floor slightly smaller and have it be completely INSIDE of the shed with the shed being mounted on the ground. This would make water penetration at the floor level much easier to prevent. The bottom line is that once you get it built, it’s pretty good. Additionally, the manual states that it is NOT intended for permanent installation. It cautions you that if you want for permanent install, you must use 30″ anchors NOT INCLUDED. Only 4 small 15″ anchors are included with the shed kit; that’s not enough for good wind resistance.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  2. 21 of 23 people found the following review helpful
    4.0 out of 5 stars
    Shed In A Box as an astronomy observing hut, December 12, 2008
    By 
    H. W. Fitzgerald, Jr. (USA) –
    (REAL NAME)
      

    Amazon Verified Purchase(What’s this?)

    I purchased the Shed In A Box to use in astronomy. I tried several tents and none worked well. Then I discovered Shed In A Box and decided to give it a try. It was a good move. Shed In A Box is made of steel pipes that all fit together easily and they stay that way even when moved. The covering is made of thick and strong plastic that so far has weathered heavy rains and wind. The only problem I see when using this as just a shed to store equipment is that rain can run under the bottom edges and get the ground wet underneath the stored equipment. But in most cases this is not a problem. My use for my Shed In A box is in astronomy. It is just the right size for one person to move. With it fully assembled I can pick it up and move it to where I want. It does a great job protecting me from the elements. When it is very cold I go inside and with my Heater Buddy I am warm and cozy. My telescope is just outside the enclosure with cables running between the two. Shed in a box is easy to assembly. I assembled the whole thing in about 2 hours. Since I move the enclosure each time I observe I had to make some modifications. I added braces across the bottom of both the front and back to maintain the correct size and to make it more rigid. To make it more air tight I modified the way the covering is attached. I am also adding a window in the front so I can see the movement of my telescope when I am inside. This enclosure was designed to be in fixed position with stakes in the ground. But using it as an astronomical hut works great. I can walk into the enclosure and stand up without hitting my head. I am 5 foot 11 inches tall. It will accommodate two observers with their equipment very comfortable. Since I am not using Shed In A Box as it was intended I lowered the rating to 4 because there were modification I had to make to suite my needs. As for using it as a shed to store equipment like lawn mowers, I would give it 5 stars. I also talked to customer service at ShelterLogic and they were quick and very helpful. If you need is just to store garden equipment this is a great choice. In my case the use is different and with some modification it is a great choice for astronomy observing. It is a great buy.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  3. 12 of 13 people found the following review helpful
    5.0 out of 5 stars
    Great shed, March 13, 2010
    By 
    C. Perez
    (REAL NAME)
      

    Amazon Verified Purchase(What’s this?)

    Great price and ships free. I received this in 3 days even with the free super saver shipping. I have it in my back yard and plan on leaving it there. No leaks, spacey and its anchored down with 15 inch auger stakes (included). I bought the 30 inch auger stakes for it on amazon so its not going anywhere. No problems during storms I have it between the side of the house and privacy fence. Vinyl is thick and set up was rather painless. Good idea to make a floor for it if your going to have it up for awhile. I set some bricks down and put cheap ply wood on that for the floor so things won’t get wet. I have had it for 3 months now and I recommend this product.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

Comments are closed.